The "D" type clamp strap does not require an additional clamp. It is secured around the circumference of the Starbar by the use of a bolt. The strap connection must be flexible so that no physical stress is transmitted to the Starbars. Avoid using large gauge, heavy wire.
Sizing Breakdown
| Item # | Starbar Diameter | Width | Rated Current | Hole Diameter |
|---|---|---|---|---|
| D-13 | 0.50 Inch 13 mm | 0.95 Inch 24 mm | 50 Amp | 0.41 Inch 10 mm |
| D-16 | 0.63 Inch 16 mm | 0.95 Inch 24 mm | 50 Amp | 0.41 Inch 10 mm |
| D-19 | 0.75 Inch 19 mm | 0.95 Inch 24 mm | 50 Amp | 0.41 Inch 10 mm |
| D-25 | 1.00 Inch 25 mm | 0.95 Inch 24 mm | 100 Amp | 0.41 Inch 10 mm |
| D-28 | 1.10 Inch 28 mm | 0.95 Inch 24 mm | 75 Amp | 0.41 Inch 10 mm |
| D-32 | 1.25 Inch 32 mm | 0.95 Inch 24 mm | 100 Amp | 0.41 Inch 10 mm |
| D-35 | 1.38 Inch 35 mm | 2 Inch 51 mm | 200 Amp | 0.55 Inch 14 mm |
| D-38 | 1.50 Inch 38 mm | 2 Inch 51 mm | 200 Amp | 0.55 Inch 14 mm |
| D-44 | 1.75 Inch 44 mm | 2 Inch 51 mm | 200 Amp | 0.55 Inch 14 mm |
| D-50 | 2.00 Inch 50 mm | 2 Inch 51 mm | 200 Amp | 0.55 Inch 14 mm |
| D-54 | 2.12 Inch 54 mm | 2 Inch 51 mm | 200 Amp | 0.55 Inch 14 mm |
| D-64 | 2.50 Inch 64 mm | 2 Inch 51 mm | 200 Amp | 0.55 Inch 14mm |
| D-70 | 2.75 Inch 70 mm | 2 Inch 51 mm | 200 Amp | 0.55 Inch 14 mm |
| D-76 | 3.00 Inch 76 mm | 2 Inch 51 mm | 200 Amp | 0.55 Inch 14 mm |
Specifications
Identification
Some of the D-clamps are stamped with two part numbers. The number on the clamp’s end identifies the element diameter in mm. The number on the opposite end is the working length in inches.
Ordering Specifications
When ordering D type straps for Starbar diameter 13 mm (0.50 inch) to 32 mm (1.25 inch) specify the standard D-clamp or optional D-clamp with a long lead. The working length, measured from the center of the Starbar to the center of the hole in binding post, is used to determine the length of the long lead. The 35 mm (1.38 inch) to 76 mm (3.00 inch) Starbar has two 100 amp aluminum braided straps held together by a common end clip. When ordering, specify the working length; minimum is 152 mm (6 inch).
Availability
Most sizes are available from stock. Others can be shipped in one week, or quicker for emergencies.
REQUEST INFORMATION