The terminal clamps are used to hold the aluminum straps in compression around the circumference of the Starbars. The aluminum strap and terminal clamp should be installed at the very end of the Starbar.

The "M" type  derives its name from its similarity to the letter M, and manual.

Category:

Sizing Breakdown

Item #Item NameStarbar DiameterInside DiameterWidthDistance Between Wings
M-07M - Type Terminal Clamp0.25 Inch
7 mm
0.25 Inch 7 mm0.50 Inch
13 mm
1.25 Inch
32 mm
M-10M - Type Terminal Clamp0.38 Inch
10 mm
25 Amp0.50 Inch
13 mm
1.30 Inch
34 mm
M-11/13M - Type Terminal Clamp0.44 Inch
11 mm
25 Amp0.50 Inch
13 mm
1.50 Inch
37 mm
M-11/13M - Type Terminal Clamp0.50 Inch
13 mm
50 Amp0.50 Inch
13 mm
1.50 Inch
37 mm
M-16M - Type Terminal Clamp0.63 Inch
16 mm
50 Amp0.50 Inch
13 mm
2.20 Inch
56 mm
M-19M - Type Terminal Clamp0.75 Inch
19 mm
50 Amp 0.75 Inch
19 mm
2.30 Inch
58 mm
M-25M - Type Terminal Clamp1.00 Inch
25 mm
100 Amp1.00 Inch
25 mm
3.00 Inch
77 mm
M-32M - Type Terminal Clamp1.25 Inch
32 mm
100 Amp 1.25 Inch
32 mm
3.20 Inch
81 mm
M-35/38M - Type Terminal Clamp1.38 Inch
35 mm
100 Amp 1.25 Inch
32 mm
3.80 Inch
97 mm
M-35/38M - Type Terminal Clamp1.50 Inch
38 mm
200 Amp 1.25 Inch
32 mm
3.80 Inch
97 mm
M-44M - Type Terminal Clamp1.75 Inch
44 mm
200 Amp1.50 Inch
38 mm
4.60 Inch
118 mm
M-54M - Type Terminal Clamp2.12 Inch
54 mm
200 Amp1.50 Inch
38 mm
4.50 Inch
114 mm

Terminal Clamps Chart

Starbar Diameter M – Type Terminal Clamps
(M) Part Number Inside Diameter Width Distance Between Wings
MM Inch P/N MM Inch MM Inch MM Inch
7 0.25 M-07 7 0.25 13 0.50 32 1.25
10 0.38 M-10 10 0.40 13 0.50 34 1.30
11 0.44 M-11/13 13 0.50 13 0.50 37 1.50
13 0.50 M-11/13 13 0.50 13 0.50 37 1.50
16 0.63 M-16 16 0.65 13 0.50 56 2.20
19 0.75 M-19 19 0.75 19 0.75 58 2.30
25 1.00 M-25 25 1.00 25 1.00 77 3.00
32 1.25 M-32 30 1.20 32 1.25 81 3.20
35 1.38 M-35/38 35 1.40 32 1.25 97 3.80
38 1.50 M-35/38 35 1.40 32 1.25 97 3.80
44 1.75 M-44 40 1.60 38 1.50 118 4.60
54 2.12 M-54 51 2.00 38 1.50 114 4.50
70 2.75 N/A N/A N/A N/A N/A N/A N/A
The T-100+5 is an extended tool that can be used as a substitute for the T-100. An extended tool is not available for the T-90.
*The T-RA (right angle tool) can be used on any of the T-type clamps.

Specifications

Temperature Limitation

Clamps are made from heat resistant steel and should never be operated in an ambient temperature over 500ºF (260ºC).

Identification

The stainless steel clamps are stamped with a number for easy identification and proper matching to the correct diameter Starbars. The expansion tools have the part numbers marked on the handle.

Availability

Most sizes are available from stock. Others can be shipped in one week, or quicker for emergencies.

Expansion Tool

T-90 

Notes

The T-100+5 is an extended tool that can be used as a substitute for the T-100. An extended tool is not available for the T-90.

  REQUEST INFORMATION